Tags:
create new tag
view all tags

HP EliteDesk 800 G5

These models have only been tested with UEFI boot, we do not expect to use legacy boot for this series. The SecureBoot option was disabled along with support for legacy boot.

These models have only been tested with SL7.6, we will not provide any support for older platforms such as SL6.

Tower / SFF

We expect the standard "Small Form Factor" (SFF) model to behave in the same way as the tower.

This was tested using an nvme-based SSD for the primary disk.

This model is configured using the lcfg/hw/hp_elitedesk800g5.h LCFG header.

  • Video (VGA and displayport, single and dual head) DONE
  • Audio DONE
  • Wired connection DONE
  • PXE install DONE
  • USB - partial, USB-C does not work (might be a hardware issue? will check when we get more machines)
  • Suspend/hibernate - not yet tested

Important: You MUST disable the "HP Sure Recover" option in the BIOS otherwise the machine may fail to boot after the first phase of the installation process.

-- squinney - 2019-09-23

Topic revision: r2 - 2019-09-24 - squinney
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback